
Custom Jewelry Drawer Boxes
Custom jewelry drawer boxes: rigid textured-paper drawer box with ribbon pull and slide-out tray, 3 sizes. MOQ 300 pcs. Request a quote.
Custom jewelry drawer boxes open the way a drawer does: pull the black ribbon tab and the inner tray slides out of its textured paper sleeve, so the jewelry is presented flat and face-up instead of being lifted out of a lidded box. The reference box is a square rigid drawer box in white textured specialty paper with a black printed logo, a black ribbon pull, and a slide-out tray with a black plastic lining. Slide out jewelry boxes like these are ordered most often by jewelry brands that sell online and want the unboxing to work on camera: the sleeve comes off in one smooth pull, the piece is already on display, and the customer never has to dig it out of tissue or a pouch.

Why a drawer box presents jewelry better than a lidded box
A lidded box hides the jewelry until the lid is lifted, and then the lid has to go somewhere. A drawer style rigid box for jewelry keeps the presentation in one motion — the sleeve stays in one hand, the tray slides out in the other, and the piece is lying flat in its tray, ready to photograph or to try on. The ribbon pull is the detail that makes it work: a short black grosgrain tab fixed to the tray, long enough to grip, so the tray comes out straight instead of tipping. Jewelry drawer gift boxes also stack better than lidded boxes, because there is no lid to slide off in a pile, and the sleeve protects the tray in the post. The textured paper is the second half of the effect: the reference sleeve is white paper with a raised, almost leather-like texture, which reads as luxury in the hand and gives the black printed logo something to sit on. A rigid drawer box for a jewelry set finishes the job by keeping the set together — rings, earrings and necklace in one tray, in one sleeve, instead of three small boxes.
Sizes — 3 stock sizes, custom on request
| Size (cm) | Usually fits |
|---|---|
| 7×7×2 | Rings, stud earrings, small pendants |
| 9×9×2 | Necklaces, bracelets, earring sets |
| 11×11×2 | Jewelry sets, watches, larger pieces |
The selector and the attribute table agree on these three sizes — unlike the magnetic box listing — and the selector defaults to the smallest, 7×7×2 cm. Custom sizes are accepted. The box is square in all three stock sizes, and the shallow 2 cm height suits flat jewelry rather than tall pieces. Personalized jewelry boxes wholesale buyers usually start with the 9×9 cm size and add the 7×7 cm for rings and the 11×11 cm for sets. The single-item packing size given is 9×9×2 cm at 0.1 kg, which covers only the middle size — confirm the packing size for the other two sizes when you order.

Textured paper, ribbon pull and the tray
- Textured paper: the sleeve is white specialty paper with a visible raised texture, shown in every photo. The listing calls the finish "Textured" in its printing-handling attribute. There is no colour list — the colour selector offers only "custom" — so confirm the available paper colours when you order.
- Ribbon pull: a black ribbon tab is fixed to the tray and sticks out of the sleeve, so the drawer can be pulled open with one finger. The photos show the ribbon clearly on the closed box and in the hand. The listing also names a handle and a ribbon as accessories; the ribbon pull in the photos is the ribbon, and no separate handle is visible.
- Photos mix in a different product: four of the six reference photos also show a black transparent display case with a clear cover and a "PUSH" catch, holding the same earrings. That case is a separate display product mixed into the gallery — it is not part of this drawer box, and the listing's "plastic" liner refers to the tray lining, not the case. Do not order the drawer box expecting the display case to be included.
- Logo: the reference print is a black logo on the white sleeve, applied by hot stamping. The printing-handling attribute lists "Textured, Silver Foil, Stamping", so foil and textured finishes can be combined — confirm the print method and colour in writing.
- Closure: the attributes also name a magnetic closure, but the photos show a plain slide-out drawer with no visible magnet — confirm whether a magnet is fitted or whether the listing copied the closure from the magnetic box.
- Material: paper cardboard, specialty paper, rigid box construction, drawer shape, modern luxury style, for jewelry, watches and eyewear as gift favour packaging.

Six things to check before ordering custom jewelry drawer boxes
- Ordering 200 pieces when the minimum is 300. The attribute table and the custom-print option both say MOQ 300 pcs, but the video cover on the same page says "MOQ 200pcs", and the company text claims "Low MOQ" — confirming the real minimum before ordering can keep a small order from being refused.
- Expecting the black display case in the photos. Four of the six reference photos show a black transparent display case with a clear cover holding the earrings, but that case is a different product mixed into the gallery, not part of the drawer box; confirming that the order is for the sleeve-and-tray drawer box only can keep the delivered box from missing the piece the photos seemed to promise.
- Expecting a magnetic closure. The attributes name a magnetic closure, but the photos show a plain slide-out drawer with a ribbon pull and no visible magnet — confirming whether a magnet is fitted can keep the box from arriving without the closure the listing promised.
- Ordering by the "250g" thickness. The thickness field says only "250g" — the listing's only thickness option, with no gsm figure and no mm thickness at all — so confirming the board weight and the finished rigidity on a sample can keep the sleeve from feeling flimsy.
- Taking "eco-friendly" as a certified claim. The listing calls the box eco-friendly and high-end, but the liner is plastic and the page gives no certificate, no percentage and no standard — confirming the eco status with Magicalpack before using it as a selling point can keep the page honest.
- Planning around the lead-time section. The listing's lead-time section is empty — heading only, no data — and the FAQ only says 7–15 days for small batches and about 30 days for large ones; confirming the lead time for the actual quantity before promising a date can keep a launch on schedule.

At a glance
- Rigid drawer box with a slide-out tray, black ribbon pull and white textured paper sleeve.
- Three stock sizes: 7×7×2, 9×9×2 and 11×11×2 cm; custom sizes accepted.
- Hot stamping logo; textured and silver foil finishes listed.
- White textured paper shown; colour is custom, with no colour list given.
- Photos mix in a different product: a black transparent display case appears in four of the six photos — it is not part of this drawer box, so do not order expecting it to be included.
- 110 sold on the reference listing, with 0 product reviews (listing figures, not Magicalpack's).
- The listing calls the box eco-friendly and high-end, but gives no certificate or standard and the liner is plastic — treat the claim as unverified until Magicalpack confirms it.
- What it does not do: the listing gives no board thickness in millimetres, no design time, no sample price, and no usable lead-time table — confirm all four when you order.

Price and order
- Price: calculated per order — request a quote. (No fixed price is published.)
- Minimum order quantity: 300 pcs (Reference — to be confirmed by Magicalpack; the video cover says 200 pcs).
- Lead time: 7–15 days for small batches, about 30 days for large batches, per the FAQ — but the listing's own lead-time section is empty, so treat this as unconfirmed (Reference — to be confirmed).
- Design: not given on the listing; sampling: 3–7 working days per the attribute table (Reference — to be confirmed by Magicalpack). Quotes are usually given within 24 hours of an enquiry, except weekends and holidays.
Specifications
All values in this table are reference values from the supplier listing — to be confirmed by Magicalpack.
| Item | Value |
|---|---|
| Material | Paper cardboard, specialty paper |
| Box type | Rigid box, drawer shape, square |
| Thickness / GSM | 250g (the listing's only thickness option; no gsm given — confirm the board weight) |
| Sizes | 7×7×2, 9×9×2, 11×11×2 cm; custom sizes accepted |
| Colours | Customized colour; selector offers only "custom" (white textured box shown); no colour list given |
| Printing | Hot stamping logo; textured and silver foil finishes listed |
| Opening | Slide-out drawer with black ribbon pull (a handle is also named in attributes but not visible) |
| Liner / tray | Plastic lining in the tray (the black display case in four photos is a different product, not the liner) |
| Closure | Magnetic closure named in attributes — not visible in photos, to be confirmed |
| Feature | Eco-friendly and high-end per the listing, with no certificate or standard — unverified; liner is plastic |
| Minimum order quantity | 300 pcs (video cover says 200 pcs) |
| Lead time | 7–15 days small batches, about 30 days large batches (FAQ only; lead-time section empty) |
| Design / sampling | Design time not given; sample 3–7 working days; sample price not given |
| Use | Jewelry, watches and eyewear gift packaging |
How to order
- Send your artwork: your logo file, plus the size and colour you want.
- Confirm the tray and the closure: ask what the tray lining is and whether a magnetic closure is fitted, since the photos and the attributes disagree on the closure — and note the black display case in the photos is a separate product, not included.
- Approve a sample: check the drawer slide, the ribbon pull, the textured paper and the tray lining before the full run.
- Bulk production: lead time 7–15 days for small batches and about 30 days for large batches per the FAQ; price is calculated per order.
Frequently asked questions
What sizes does the jewelry drawer box come in? Three stock sizes: 7×7×2, 9×9×2 and 11×11×2 cm, with custom sizes accepted. The selector defaults to the smallest size.
How does the drawer open? Pull the black ribbon tab and the inner tray slides out of the textured paper sleeve, presenting the jewelry flat and face-up. Note the black transparent display case in some photos is a different product — it is not part of this drawer box.
Magnetic or drawer — which jewelry box is better? A magnetic box snaps shut and suits a single piece kept and reused; a drawer box presents the piece flat and face-up as it slides out, which suits sets and online unboxings. Magicalpack offers both styles — the magnetic rigid box and this drawer box — so the choice is about how the jewelry is presented, not about quality.
What is the minimum order? 300 pcs on the reference listing's attribute table and custom-print option — but the video cover on the same page says 200 pcs, so confirm the real minimum before ordering.
Is the box eco-friendly? The listing calls it eco-friendly but gives no certificate, no percentage and no standard, and the liner is plastic, so the claim is unverified. Confirm the eco status with Magicalpack before using it as a selling point.


